EDIT : New video. Watercooling my pc

www.youtube.com/watch

Updated my computer this christmas

http://www.youtube.com/watch?v=XrFdO3DH ... r_embedded

Nice build, Kenneth.

Why didnt you top it with Corsair HX850 PSU ?

/T

Quote by: K3rmIT

Nice build, Kenneth.

Why didnt you top it with Corsair HX850 PSU ?

/T

Because i already had the NorthQ suply. And it has served me well.

But to top of the theme it would have bean nice with the Corsair yes

Nice rigg

Looking into the same cabinett myself, but without the water cooling system.

Im getting closer to robbing a bank every day now, just to be able to buy some of the HW i want...

Nice, much the same I get tomorrow'ish ^^

I use the NorthQ 3850 Siberian Tiger CPU cooler. Hopefully i'll find the brackets so I can use it in my new rig tomorrow.

...damn thats nice.

Me and Ramstad have already jerked eachother off, in a private vt-channel, talkin'about that 800d case ;-) 

Looks real sweet. Love the clean cable-behind-mainboard setup.

How are noise-levels? 

I bet your ram-fans are the biggest noise-makers?

 @BajBaj : stay the hell away from more new hardware - U bastard. U already have enough!

...gettingmoreandmorejealousofotherpeopleshardware...newhardwaresoonseeker

PS: miss U tweet. Time to come back to your real friends? ;-) 

Ah nice build Tweety im drewling here.:clap::clap:

Do you got any temps for us?

does it make alot of noice?

Di you clock the 920?

Temps :

Cpu idle 24-25, load (prime95) 54 degrees

Cpu cores idle 36-40 core0 at 40 and then down to 36 on core 3. Load about 10+ higher.

MB is arround 30 all over.

NorthBridge Tops at 52.

GPU idle 45, load 65 (5 higher than in the antec 902) 

Noiselevel is actualy higher on the 800D than the Antec902 atm.

I've changed all the stock fans. Only stock left is the one for the H50cooler. This is whats making the noice now.

The Memorycooler i've attached to the fancontroller. At full speed the fans on that run at 3500RPM or something.

At that rate they make some noice, but set them to 2500RPM and now they are silent (a big update from my last memcoolers, low vibrations and good cooling). 

I'm still playing arround a bit with the fan setup. ATM i have 1 intake fan at the buttom, 1 in front, 1 on the top anf then the cpu cooler (H50) with a push pull setup.

To fans that push air out on the top. I will get the noicelevel down later when i'm done playing with clocking and etc.

Oh one more stock fan, the one cooling the hadrdrives, but that u cant hear.

The way the 800D is built its clearly ment primaraly for watercooling, but hwo cares,,, hehe. You gotta love it. Its a looker

I think that with the stock fans this would have bean a quit case, but first thing i did was to rip thoose out

The Asus MB comes with several options for overclocking preprogramed. Takes 5sec to setup. Belive it or not it works (not hadrcore clockink but still)

On one of the programs tha come with the MB you have the choise to clock it to a 945 or 965. I set it to 956 (3200Mhz). I'll try it at that for a while and see.

PS. Miss u to thrill

clocked it a little bit now. For now i've set it to about 3800Mhz. No problems going higher, but i have no need for more atm.

Also i wanted to maintaine low voltage-/temps-/noise- levels

Pictures say it all. Also i've overclocked my GPU.

I've set up a push-pull on the radiator for the CPU and i've changed (again) the GPU cooler. The one i had waas massive.

Temps on the GPU is the same on both coolers. So arround 42-46 idle and no more than 70 on load as i've sean.

pictures are worth a thousand words, soo....

One picture while running Prime95 other almost idle.

The GPU cooler